Why European Manufacturers Trust PRVÁ ZVÁRAČSKÁ, a. s. for Pressure Equipment Compliance

In today’s industrial world, safety, reliability, and compliance are non-negotiable. European manufacturers face stringent standards when it comes to pressure equipment — and meeting those standards requires both technical expertise and certified verification. The Pressure Equipment Directive (PED) 2014/68/EU sets the foundation for ensuring that all pressure equipment used in the European market is safe, well-designed, and compliant.

For many manufacturers, the process of understanding and meeting these regulations can seem complex. This is where PRVÁ ZVÁRAČSKÁ, a. s. steps in — as a trusted Notified Body (NB 2408) by European Commission, ensuring smooth and reliable conformity assessment processes for pressure equipment across Europe.

Understanding the Pressure Equipment Directive (PED) 2014/68/EU

The Pressure Equipment Directive (PED) was implemented to harmonize safety standards across the European Union. It applies to all pressure equipment and assemblies that operate with a maximum allowable pressure above 0.5 bar. The directive covers a wide range of equipment, including:

• Pressure vessels
• Boilers
• Heat exchangers
• Industrial piping systems
• Safety accessories and assemblies

The directive requires that any equipment placed on the European market must carry CE marking and a Declaration of Conformity, confirming that it meets all essential safety requirements. This ensures consistent quality and safety for manufacturers, suppliers, and end-users.

The Role of a Notified Body in PED Certification

Compliance with PED cannot be achieved through self-certification alone for most equipment categories. Instead, it requires verification by a Notified Body, which is an organization approved by a European Union member state to conduct conformity assessments.

As a Notified Body (NB 2408) under the Pressure Equipment Directive, PRVÁ ZVÁRAČSKÁ, a. s. performs detailed conformity assessments, ensuring that manufacturers meet every technical and safety requirement.

These assessments are carried out based on specific modules defined by the PED, including:
A2, B, C2, D, D1, E, E1, F, G, H, and H1 — covering every stage from design examination to final product verification.

Each module represents a different route to compliance, depending on the category and risk level of the equipment. Whether it’s quality assurance during manufacturing or design verification, PRVÁ ZVÁRAČSKÁ, a. s. offers the right solution for each requirement.

Why Manufacturers Choose PRVÁ ZVÁRAČSKÁ, a. s.

European manufacturers rely on PRVÁ ZVÁRAČSKÁ, a. s. because of its long-standing reputation for integrity, precision, and efficiency in certification. Below are key reasons why this organization is trusted across industries:

1. Proven Expertise in Pressure Equipment Compliance

With decades of experience, PRVÁ ZVÁRAČSKÁ, a. s. understands the technical and regulatory challenges that manufacturers face. Our experts provide clear guidance throughout the certification journey, helping clients avoid costly delays or non-conformities.

2. Comprehensive Assessment Procedures

The company offers a complete range of PED certification services under all relevant modules. From design validation to production quality assurance, they ensure that every stage of the process meets European safety expectations.

3. Accredited and Recognized Notified Body

As a recognized Notified Body (NB 2408), PRVÁ ZVÁRAČSKÁ, a. s. holds the authority to issue CE certifications for pressure equipment sold across the European Economic Area. This recognition builds trust and guarantees compliance across borders.

4. Transparent and Supportive Approach

Compliance doesn’t have to be complicated. The team at PRVÁ ZVÁRAČSKÁ, a. s. works closely with clients, providing step-by-step process, clear communication, and technical insight. Our human-centric approach ensures that even complex regulatory processes feel straightforward and manageable.

5. Commitment to Safety and Quality

Safety is at the heart of every service provided. The company ensures that each piece of equipment certified under our supervision meets the strictest standards of quality, reliability, and environmental responsibility.

How PRVÁ ZVÁRAČSKÁ, a. s. Simplifies the Certification Process

The certification process under the Pressure Equipment Directive involves several stages — from design examination and testing to final inspection and documentation review. PRVÁ ZVÁRAČSKÁ, a. s. ensures a seamless workflow by:

• Assessing technical documentation for completeness and accuracy.
• Conducting inspections and testing according to PED standards.
• Verifying permanent joining procedures (as per Annex I, 3.1.2).
• Reviewing and approving manufacturer quality systems.
• Issuing CE marking certification upon successful compliance.

This end-to-end service ensures that manufacturers can confidently market our products throughout Europe without facing compliance issues.

The Human Side of Compliance

While certification is a technical process, PRVÁ ZVÁRAČSKÁ, a. s. understands that behind every piece of equipment, there are people — engineers, manufacturers, and customers who depend on reliability and safety.

The company’s philosophy revolves around partnership and trust. By maintaining open communication, providing clear feedback, and upholding transparency, we help clients feel supported throughout our certification journey.

Why Choose PRVÁ ZVÁRAČSKÁ, a. s. for Pressure Equipment Directive Compliance

Choosing the right certification partner makes all the difference. PRVÁ ZVÁRAČSKÁ, a. s. is not just a technical authority — it’s a trusted partner that values collaboration, safety, and excellence.

• Accredited Expertise: Officially recognized as Notified Body NB 2408.
• Full-Service Certification: Covers all PED modules from design to final inspection.
• Efficient Process: Clear communication and structured workflow reduce delays.
• Global Recognition: CE-certified equipment is accepted throughout the EU.
• Customer-Centric Approach: Personalized guidance ensures smooth compliance.

By combining technical excellence with human understanding, PRVÁ ZVÁRAČSKÁ, a. s. continues to be the go-to partner for pressure equipment manufacturers across Europe.

Frequently Asked Questions (FAQs)

1. What is the Pressure Equipment Directive (PED) 2014/68/EU?
The PED is a European regulation that sets safety and design standards for pressure equipment operating above 0.5 bar, ensuring safe use and free market circulation across the EU.

2. Why is CE marking important for pressure equipment?
CE marking confirms that the equipment meets all European safety and conformity requirements, allowing it to be legally sold within the EU and EEA.

3. What role does PRVÁ ZVÁRAČSKÁ, a. s. play in certification?
As a Notified Body (NB 2408), PRVÁ ZVÁRAČSKÁ, a. s. conducts conformity assessments, testing, and certification to ensure equipment complies with PED requirements.

4. Which PED modules are covered by PRVÁ ZVÁRAČSKÁ, a. s.?
They are accredited for modules A2, B, C2, D, D1, E, E1, F, G, H, and H1, covering all stages from design evaluation to final product verification.

5. How can manufacturers start the certification process?
Manufacturers can contact PRVÁ ZVÁRAČSKÁ, a. s. directly to discuss their equipment type and category. The team provides tailored guidance for document preparation, testing, and CE marking.