EN 10204 Type 3.2
Steel Material
Malaysia
EN 10204 Type 3.2 in Malaysia: Strengthening Steel Material Verification for International Projects
By First Welding Certification Technical Editorial Team
6 Min Read Time
19 Nov 2026
Table of Contents
- Introduction
- Growing Demand for Material Inspection in Malaysia
- Why Is EN 10204 Type 3.2 Important?
- Difference Between EN 10204 Type 3.1 and Type 3.2
- Key Requirements for Type 3.2 Inspection
- How Malaysian Manufacturers Can Prepare
- Benefits of EN 10204 Type 3.2
- Frequently Asked Questions
- Related Searches
- Conclusion
EN 10204 Type 3.2 in Malaysia
Material Identification
Independent Verification
Material Testing
Inspection Documentation
Introduction
Malaysia has a growing industrial and manufacturing sector, with companies involved in steel production, metal fabrication, oil and gas, petrochemical, shipbuilding and engineering.
Some important industrial areas include:
- Johor: Petrochemical, steel fabrication and industrial manufacturing.
- Selangor: Engineering, metal processing and manufacturing.
- Penang: Precision engineering and industrial component manufacturing.
- Terengganu: Oil and gas and offshore engineering.
- Sarawak: Energy, oil and gas and industrial projects.
Companies operating in these sectors frequently purchase and supply metallic materials such as steel plates, pipes, bars, fittings and structural components.
For international projects, customers may request material inspection documentation to demonstrate that supplied materials meet the specified purchase requirements. EN 10204 is a European standard that specifies different types of inspection documents for metallic products.
Among these, Type 3.2 provides an additional level of verification because the inspection certificate is validated by both the manufacturer’s authorised inspection representative and the purchaser’s authorised inspection representative or an inspector designated by official regulations.
Growing Demand for Material Inspection in Malaysia
Malaysia has several industries where material quality and traceability are important. For example, oil and gas companies in Terengganu and Sarawak may require steel pipes, pressure equipment materials and industrial components for their projects. Similarly, manufacturers in Johor and Selangor may supply fabricated steel products and metallic components to international customers.
These materials may need to meet specific requirements relating to:
- Chemical composition.
- Mechanical properties.
- Material grade.
- Dimensional requirements.
- Heat number identification.
- Inspection and testing documentation.
When customers specify EN 10204 Type 3.2, manufacturers and suppliers must arrange the required inspection and verification according to the purchase order.
Why Is EN 10204 Type 3.2 Important?
Material quality is important for ensuring the reliability and performance of industrial products. Incorrect material grades, inadequate mechanical properties or missing traceability records can create problems during manufacturing and project inspections. EN 10204 Type 3.2 provides documented evidence that the supplied metallic products comply with the purchase requirements and includes results of specific inspection.
The certificate is validated by:
- The manufacturer’s authorised inspection representative who is independent of the manufacturing department.
- The purchaser’s authorised inspection representative or an inspector designated by official regulations.
This additional validation helps customers obtain independent verification of the specified inspection requirements. Type 3.2 documentation may be requested for steel plates, pipes, pressure equipment materials, fittings and other metallic products, depending on the project and purchase specifications.
Difference Between EN 10204 Type 3.1 and Type 3.2
Manufacturers and material suppliers should understand the difference between these two inspection certificate types.
| Requirement | Type 3.1 | Type 3.2 |
|---|---|---|
| Document | Inspection Certificate | Inspection Certificate |
| Specific inspection results | Yes | Yes |
| Manufacturer's authorised representative | Yes | Yes |
| Purchaser's authorised inspector or officially designated inspector | Not required for validation | Required |
| Additional independent verification | No additional Type 3.2 validation | Yes |
Type 3.1 is validated by the manufacturer’s authorised inspection representative who is independent of the manufacturing department.
Type 3.2 requires additional validation by the purchaser’s authorised inspection representative or an inspector designated by official regulations.
The required certificate type should be agreed upon during the purchasing stage.
Key Requirements for Type 3.2 Inspection
When preparing for EN 10204 Type 3.2 inspection, manufacturers and suppliers should establish suitable documentation and inspection arrangements.
Some important requirements include:
- Material Identification – Materials should have suitable identification, including heat numbers, batch details and relevant product markings.
- Material Test Certificates – Existing material test documentation should be reviewed to establish the material grade and applicable test results.
- Chemical Composition – Chemical analysis results should demonstrate compliance with the specified material requirements.
- Mechanical Testing – Applicable mechanical tests may include tensile testing, impact testing and hardness testing, depending on the product specification and purchase order.
- Inspection and Verification – The agreed inspection activities should be carried out with the involvement of the relevant authorised inspection representatives.
- Documentation and Traceability – Inspection reports, material identification details, test results and other relevant records should be maintained to demonstrate compliance with the order.
The inspection scope and required tests must be agreed in advance between the relevant parties.
How Malaysian Manufacturers Can Prepare
Companies in Malaysia can take several steps to prepare for EN 10204 Type 3.2 inspection.
- Identify Material Requirements: Review the purchase order and identify the required material grade and product specification.
- Confirm Certificate Type: Determine whether Type 3.1 or Type 3.2 documentation is required.
- Maintain Material Traceability: Ensure that heat numbers, batch identification and material markings are properly controlled.
- Arrange Testing: Identify the chemical, mechanical and additional tests required by the order.
- Coordinate Inspection: Arrange inspection with the manufacturer’s representative and the purchaser’s authorised inspector or an officially designated inspector, as applicable.
- Maintain Records: Keep material test certificates, inspection reports and supporting documentation.
- Review Certificate Details: Verify that the inspection certificate reflects the supplied products and agreed purchase requirements.
Early planning can help avoid delays and documentation issues during material supply and project acceptance.
Benefits of EN 10204 Type 3.2
Obtaining the appropriate Type 3.2 inspection documentation can provide several benefits to manufacturers and material suppliers.
- Material Verification: Provides documented evidence of specific inspection results.
- Independent Validation: Involves the purchaser’s authorised inspector or an inspector designated by official regulations.
- Better Traceability: Helps connect supplied materials with their inspection records.
- Customer Confidence: Supports customer requirements for material verification.
- Project Documentation: Helps meet agreed inspection and documentation requirements.
- International Supply: Supports material documentation requirements for international engineering and manufacturing projects.
However, Type 3.2 documentation does not automatically guarantee acceptance by every customer. The material must meet the applicable purchase order, product specification and project requirements.
Frequently Asked Questions
What is EN 10204 Type 3.2 in Malaysia?
EN 10204 Type 3.2 is an inspection certificate for metallic products that includes specific inspection results and validation by the manufacturer’s authorised inspection representative and the purchaser’s authorised inspection representative or an inspector designated by official regulations.
What is the difference between Type 3.1 and Type 3.2?
Type 3.1 is validated by the manufacturer’s authorised inspection representative independent of the manufacturing department. Type 3.2 requires additional validation by the purchaser’s authorised inspection representative or an officially designated inspector.
Which materials require Type 3.2 inspection?
Steel plates, pipes, fittings, bars and other metallic products may require Type 3.2 documentation when specified by the purchase order or project requirements.
What documents are required for Type 3.2 inspection?
Depending on the inspection scope, documents may include purchase specifications, material test certificates, inspection and test plans, material identification records and relevant test reports.
Related Searches
- EN 10204 Type 3.2 Inspection Cost: 9 Factors That Influence Material Verification
- EN 10204 Certificate Rejection: 9 Common Errors and How to Avoid Them
- How Malaysian Steel Producers Prepare for EN 10204 Type 3.2: From Steel Production to Material Inspection
- When Is an EN 10204 Type 3.2 Certificate Required for PED Pressure Equipment Globally?
Conclusion
Malaysia has a diverse industrial sector, with companies involved in oil and gas, petrochemical, steel fabrication, shipbuilding and engineering.
For manufacturers and material suppliers operating in Johor, Selangor, Penang, Terengganu, Sarawak and other industrial regions, maintaining material quality and traceability is important when supplying products for international projects.
EN 10204 Type 3.2 provides an inspection documentation framework that includes specific inspection results and additional validation by the relevant authorised inspection representatives. By maintaining material identification, appropriate testing arrangements and complete inspection records, Malaysian manufacturers can demonstrate compliance with agreed material requirements and improve customer confidence in their supplied products.
How can Malaysian steel manufacturers demonstrate material quality and traceability through EN 10204 Type 3.2 inspection?
Connect with First Welding Certification Pvt Ltd (PRVÁ ZVÁRAČSKÁ, a.s.).to discuss your material inspection and conformity assessment requirements.