PED 2014/68/EU Certification
Pressure Equipment Directive
PED certification helps manufacturers demonstrate compliance with the Pressure Equipment Directive 2014/68/EU for applicable pressure equipment placed on the EU market. PRVÁ ZVÁRAČSKÁ, a.s. (Notified Body 2408) performs conformity assessment activities within its designated scope for pressure vessels, piping, boilers, and pressure accessories.
About the Standard
What is PED 2014/68/EU?
The Pressure Equipment Directive 2014/68/EU establishes safety and conformity assessment requirements for stationary pressure equipment with a maximum allowable pressure above 0.5 bar, subject to applicable exclusions. It covers equipment design, manufacturing, inspection, technical documentation, and PED CE marking requirements.
Download the PED 2014/68/EU Certification Brochure
Learn about PED 2014/68/EU certification, applicable requirements, certification scope, and the assessment process for railway welding manufacturers.
Why It Matters
Essential Safety Requirements
Verify applicable PED essential safety requirements for pressure equipment design, manufacturing, and safety.
Risk - Based Conformity Assessment
Determine the correct PED classification and conformity assessment module based on equipment characteristics.
CE Marking
Demonstrate compliance with applicable PED CE marking requirements through the required conformity assessment.
Manufacturing Quality Control
Assess manufacturing, welding, inspection, and testing controls according to the applicable PED procedure.
Material Traceability
Verify pressure-retaining material identification, inspection certificates, and traceability records.
Key Requirements of PED 2014/68/EU
PED 2014/68/EU sets out the technical rules and testing processes needed to ensure pressure equipment meets the standards for use in the European Union market.
Design Review
Review design calculations, specifications, and applicable standards against PED safety requirements.
Material Control
Verify material properties, certificates, and traceability for pressure-retaining components.
Manufacturing Processes
Assess welding, forming, heat treatment, and assembly processes where applicable.
Personnel Qualification
Verify required qualifications for welding, permanent joining, and NDT personnel.
Inspection and Testing
Conduct applicable pressure equipment inspection, NDT, and testing procedures.
Conformity Assessment
Select the applicable PED conformity assessment module based on equipment classification.
Technical Documentation
Review drawings, calculations, material records, and inspection reports for PED compliance.
CE Marking
Complete applicable conformity assessment requirements before PED CE marking.
Certification Process
01
Initial Inquiry
Submit your certification request by providing adequate data, including application form.
02
Release of commercial offer
Our experts will review, if required visit the facility and release the commercial offer.
03
Order Confirmation
Subject to receipt of PO and commercials.
04
Registration
Internal process and audit confirmation.
05
Stage -1 Audit and Final certification audit
Subject to successful audit on each stage.
06
Report preparation, submission, review, approval and release of certification
Frequently Asked Questions
What is the Pressure Equipment Directive (PED) 2014/68/EU?
The Pressure Equipment Directive (PED) 2014/68/EU establishes essential safety requirements for pressure equipment design, manufacturing, and conformity assessment. Understanding the PED 2014/68/EU scope and applicability helps manufacturers determine whether their pressure vessels, piping systems, and assemblies require PED certification and CE marking.
What equipment is covered by PED 2014/68/EU?
PED 2014/68/EU covers pressure equipment such as pressure vessels, piping, boilers, heat exchangers, pressure accessories, and safety accessories. The directive defines pressure equipment to include vessels, piping, safety accessories, and pressure accessories used in pressure systems.
Who needs PED certification?
Manufacturers placing applicable pressure equipment or assemblies on the EU market may need to demonstrate conformity with PED 2014/68/EU. The required conformity assessment procedure depends on the equipment’s classification, category, and applicable requirements under the directive.
What are the main requirements of PED 2014/68/EU?
The main PED requirements include essential safety compliance, controlled manufacturing processes, and technical documentation. Understanding the PED conformity assessment procedure helps manufacturers determine the applicable assessment module, EU Declaration of Conformity requirements, and when Notified Body involvement is necessary for PED certification and CE marking.
Is CE marking required under PED 2014/68/EU?
For pressure equipment and assemblies covered by the applicable provisions of PED 2014/68/EU, CE marking is required after the relevant conformity assessment has been successfully completed. Equipment falling under the directive’s Article 4(3) sound engineering practice provisions does not bear the CE marking under the PED.
What is a Notified Body in PED certification?
A Notified Body under PED 2014/68/EU performs specified conformity assessment activities to verify pressure equipment compliance. Understanding the PED Notified Body requirements helps manufacturers identify when third-party assessment is necessary based on equipment category, selected module, and the notified body’s designated scope.
What are PED conformity assessment modules?
How is pressure equipment classified under PED 2014/68/EU?
Pressure equipment classification under PED 2014/68/EU depends on equipment type, fluid group, maximum allowable pressure, and volume or nominal size. Understanding PED pressure equipment categories and classification helps manufacturers identify the applicable conformity assessment procedure and requirements for PED certification.
What documents are required for PED certification?
PED certification requires appropriate technical documentation, including design records, manufacturing information, inspection and testing reports, and material certificates. Understanding PED documentation requirements helps manufacturers prepare the necessary records and EU Declaration of Conformity based on the applicable equipment category and conformity assessment module.
Does PED certification cover welding and permanent joining procedures?
Yes. PED Annex I contains requirements for permanent joining, including requirements related to procedures and personnel involved in permanent joining. Depending on the equipment category and applicable conformity assessment route, approval and assessment of permanent joining procedures may be required. PZVAR provides assessment related to permanent joining procedures within its PED scope.
What is the difference between PED certification and CE marking?
PED conformity assessment verifies that pressure equipment meets the applicable requirements of Directive 2014/68/EU. Understanding PED CE marking requirements helps manufacturers identify the necessary conformity assessment procedures, complete regulatory documentation, and apply CE marking correctly before placing pressure equipment on the EU market.
How can I obtain PED 2014/68/EU certification?
To obtain PED certification, a manufacturer should first determine whether the equipment falls within the scope of PED 2014/68/EU and establish its applicable category and conformity assessment procedure. The required technical documentation, inspections, testing, quality-system assessment, and Notified Body activities are then completed according to the selected conformity assessment route. After successful conformity assessment, the manufacturer can complete the applicable EU Declaration of Conformity and CE marking requirements.
Start Your Certification Journey
Ready to Achieve International Certification Recognition?
Connect with our certification experts today. We’ll assess your requirements and outline the fastest, most cost-effective path to certification for your organisation.